WallyGro drip irrigation was designed to be an easy to use and maintain automated watering addition for our vertical garden wall products.
Setting up an irrigation system is easier than you may think - follow this guide and you’ll be on your way to automated watering in no time. Below are explanations of the points of interest in the irrigation diagram above, created specifically for our vertical garden wall planter products.
Allows for automated watering at an interval you choose. A watering schedule for varieties of plants and locations can be found and downloaded further down this page.
2. Supply Line Kit
3. Drip Line Slot (Eco)
Each Wally Eco features two slots on its sides that allows for drip line to be run through, keeping the line in place.
4. Drip Kit (Eco)
5. Drip Emitter (Eco)
The drip line connects to a drip emitter that dispenses up to 2 liters of water per hour. The emitter sits behind the divider, directing the water into the watering channel. The drip emitter is included in the Wally Eco Drip Kit.
6. Drip Line Slot (Pocket)
Each Wally Pro Pocket features a small slit in the felt on each side, above the pocket itself, that allows for drip line to be run through and behind the back panel, holding it up on either side of the pocket.
7. Drip Kit (Pocket)
8. Staggered Drip Points (Pocket)
Emitters are spaced 6" apart for even and consistent watering to all areas of the pocket. The drip line should be placed behind the rear flap, not directly in contact with the soil or plants.